Spectracom SecureSync 1200 User Reference Manual page 205

Configuring A-GPS
To configure the A-GPS settings of your SecureSync unit, or review the current configuration:
1.
2.
3.
4.
Enable A-GPS Client
The feature Enable A- GPS Client will schedule assistance data to be collected and updated
every hour. On startup, if data is present, it will be sent to the receiver.
Apply A-GPS Data
When this option is selected, SecureSync will immediately apply the time, position and satellite
data to the receiver once you click Submit.
Time and position are user- configurable; SecureSync collects A- GPS satellite data from an
external source automatically.
CHAPTER •
3 SecureSync User Reference Guide Rev. 23
Navigate to INTERFACES > GNSS Reference . The GNSS screen will be displayed.
In the GNSS Reference panel on the right, click the GEAR button next to GNSS 0 .
In the GNSS 0 window, locate the A-GPS panel at the bottom:
Note: The options displayed on your screen depend on your system con
figuration.
Configure the settings as required:
Note: Once you click
will override the system Time and Position data. Exercise caution when using this
feature, since this could negatively impact the GNSS receiver operation.
Submit , any parameters entered under
3.3 Managing References
Apply A-GPS Data
189