Checklist Ntp Configuration; The Ntp Setup Screen - Spectracom SecureSync 1200 User Reference Manual

2.15 Configuring NTP

2.15.1 Checklist NTP Configuration

The following is a list of configuration settings you may want to consider as you setup your NTP
Service. (Not all items may apply to your application, or there may be other considerations not
included in this list.)
1.
Did you setup your NTP Service and have it use the right Reference(s) ?
2.
Does your NTP Service use the right Timescale ?
3.
If required, have you setup other NTP Servers and Peers for fallback purposes?
4.
Have you configured NTP Authentication and Access Restrictions (as needed)?

2.15.2 The NTP Setup Screen

The NTP Setup
To open the NTP Setup screen, navigate to MANAGEMENT > NTP Setup . The NTP Setup
screen is divided into 5 panels:
90
See "NTP Reference Configuration" on page 97.
See "NTP Output Timescale" on page 95.
See "NTP Servers and Peers" on page 99.
See "NTP Autokey" on page 106, and .
screen provides access to all NTP configuration settings.
CHAPTER •
2 SecureSync User Reference Guide Rev. 23