Spectracom SecureSync 1200 User Reference Manual page 145

Factory default NTP.conf file:
restrict 127.0.0.1
restrict ::1
restrict default noquery nomodify
restrict -6 default noquery nomodify
keys /etc/ntp/keys/ntp.keys
controlkey 65533
requestkey 65534
trustedkey 65533 65534
server 127.127.45.0 prefer minpoll 4
server 127.127.22.0 minpoll 4
fudge 127.127.22.0 stratum 0
peer 10.10.128.35 minpoll 3 maxpoll 3 autokey
keysdir /etc/ntp/keys/
crypto pw admin123 randfile /dev/urandom
driftfile /etc/ntp/ntp.drift
logfile /home/spectracom/log/ntp.log
statsdir /home/spectracom/log/ntpstats/
statistics loopstats peerstats clockstats
filegen loopstats file loopstats type day enable
filegen peerstats file peerstats type day enable
filegen clockstats file clockstats type day enable
Prior to Expert mode being enabled, the Network: NTP Setup page will contain various tabs
for configuring different options of the NTP Service. To prevent inadvertent changes from being
made to a user-edited
removed from the web browser view as long as the Expert mode remains enabled (only the
Expert Mode tab is visible in Expert Mode; all other tabs will no longer be present). Disabling
the Expert mode restores these tabs to the Edit NTP Services window.
To enable the Expert Mode, and edit the
1.
2.
CHAPTER •
2 SecureSync User Reference Guide Rev. 23
NTP.conf
Navigate to MANAGEMENT > NETWORK: NTP Setup .
In the NTP Services panel locate the Expert Mode switch:
file via the web pages, these NTP configuration tabs are
file:
NTP.conf
2.15 Configuring NTP
129