Setting Up A Remote Log Server - Spectracom SecureSync 1200 User Reference Manual

Journal
Update
Timing
System
e.
f.
In order for the logs to be formatted correctly for Syslog storage, all log entries are displayed
using Syslog formatting. Each log entry contains the date and time of the event, the source of
the log entry, and the log entry itself.
The "time" of all log entries will be in UTC, Local, TAI or GPS time, as configured in the "Time
scale" field that is located in the System Time Setup page (Setup/Time Management). For more
information on Timescales, see "Timescales" on page 143.
4.5.2.7

Setting up a Remote Log Server

Storing log files on a remote log server supports advanced logging functionality.
Adding a remote log server:
1.
2.
3.
CHAPTER •
4 SecureSync User Reference Guide Rev. 23
Log Tab Name Facility
Local Use 7
Local Use 7
Local Use 7
Local Use 7
Local Log —Enable or disable this particular log being stored inside SecureSync. When
this box is checked, the log will be stored in SecureSync.
Remote Log —Configure the desired Syslog servers. When this box is checked, the par
ticular log will be sent to a Syslog server.
Navigate to MANAGEMENT > OTHER: Log Configuration.
In the Remote Log Server panel, click on the PLUS icon in the top-right corner of the
panel. The Add Remote Log Servers window displays.
Enter the IP address or host server name (e.g., "MyDomain.com") you want to use as a
remote log server.
Priority
Notice
Information
Error
Emergency
4.5 Quality Management
299