Safety; Safety: Symbols Used; Safety: Before You Begin Installation - Spectracom SecureSync 1200 User Reference Manual

2.5

SAFETY

2.5.1

Safety: Symbols Used

Table 2-1:
Symbol
2.5.2

SAFETY: Before You Begin Installation

This product has been designed and built in accordance with state-of-the-art standards and the
recognized safety rules. Nevertheless, its use may constitute a risk to the operator or install
ation/maintenance personnel, if used under conditions that must be deemed unsafe, or for pur
poses other than the product's designated use, which is described in the introductory technical
chapters of this guide.
Before you begin installing and configuring your SecureSync unit, carefully read the following
important safety statements. Always ensure that you adhere to any and all applicable safety
warnings, guidelines, or precautions during the installation, operation, and maintenance of
your product.
CHAPTER •
2 SecureSync User Reference Guide Rev. 23
Caution: Do not ignore the Safety Instructions!
Safety symbols used in this document, or on the product
Signal word
DANGER!
CAUTION!
NOTE
ESD
CHASSIS GROUND
Analog Ground
Recycle
Definition
Potentially dangerous situation which may lead to personal
injury or death! Follow the instructions closely.
Potential equipment damage or destruction!
Follow the instructions closely.
Tips and other useful or important information.
Risk of Electrostatic Discharge!
Avoid potential equipment damage by following ESD Best
Practices.
This symbol is used for identifying the functional ground of an
I/O signal. It is always connected to the instrument chassis.
Shows where the protective ground terminal is connected
inside the instrument. Never remove or loosen this screw!
Recycle the mentioned components at their end of life. Follow
local laws.
2.5 SAFETY
33