Spectracom SecureSync 1200 User Reference Manual page 102

2.14 Configuring Network Settings
1.
Navigate to MANAGEMENT > NETWORK: SNMP Setup .
2.
In the SNMP Traps panel, click the PLUS icon in the top-right corner.
3.
The SNMP Traps Settings window will display:
4.
Enter the required information in the fields provided. (Note that the options will vary con
textually according to your
5.
86
Version
The Version field provides a choice between
The Community field for the SNMP Community string.
SNMP User names should be between 4 and 32 characters in length.
Destination IP Version is a choice between IPv4 and IPv6.
Destination IP is destination address for the notification and password key to be
sent. The default port is 162.
The UDP Port number used by SNMP Traps [default = 162].
Engine Id must be a hexadecimal number (such as 0x1234). The Id originates
from the MIB Browser/SNMP Manager.
Auth Type provides a choice between MD5 (the default) and SHA.
The Auth Password must be between 8 and 32 characters in length.
The Priv Type field provides a choice between AES and DES.
.)
v1 , v2c , and
[v1, v2c, v3]
[v3]
CHAPTER •
2 SecureSync User Reference Guide Rev. 23
v3 [= default]
[v1, v2c]
[v3]
[v1, v2c, v3]
[v1, v2c]
[v3]
[v3]
[v3]