Spectracom SecureSync 1200 User Reference Manual page 509

c. Type " " (lower-case) to quit.
q
d.
Pressing the up/down keys scrolls through previously typed commands.
e.
Commands need to be typed in all lower-case letters.
f. Where
eth0
optional Gigabit Ethernet module for multiple network interfaces.
g. User accounts with "user" group permissions can perform "
perform any "
"admin" group permissions can perform "
Refer to "Adding/Deleting/Changing User Accounts" on page 228 for user account
setup information.
Command
clean
cleanhalt
clearlogs
clearstats
dateget
dateset
defcert
dhcp4get
dhcp4set
dns4get
dns4set
dhcp6get
dhcp6set
doyget
doyset
gpsdop
gpsinfo
gpsloc
SecureSync User Reference Guide
is the base network port and
" commands or change/reset passwords. Only user accounts with
set
Restores SecureSync configuration to factory defaults and reboots
Restores SecureSync configuration to factory defaults and halts
Clears all logs
Clears all statistical data (NTP, and oscillator/disciplining)
Displays current date (for example, 15 APR 2015)
Used to set the current date
Used to create a new Spectracom self-signed SSL certificate for HTTPS in case of expir
ation of the original certificate
Displays whether DHCP is enabled
Used to enable or disable DHCP
Displays the configured DNS servers
Used to configure the DNS servers
Displays whether DHCPv6 is enabled
Used to enable or disable DHCPv6
Used to obtain the current Day of Year
Used to set the current Day of Year
Displays GNSS receiver positional accuracy estimates
Applicable to SAASM-equipped SecureSync units only
Displays GNSS latitude, longitude and antenna height
(and higher) are used with the
eth1
" commands but cannot
get
" commands or change/reset password.
set
Description
APPENDIX
493