Enabling/Disabling Tacacs - Spectracom SecureSync 1200 User Reference Manual

4.3 Managing Users and Security
4.
Click the Add Server button. A confirmation message "The item has been added" will be
displayed if the server could be added, and the server will be added to the list.
The Server Status can be:
5.
To
4.3.6.2

Enabling/Disabling TACACS+

1.
Navigate to MANAGEMENT > OTHER: Authentication .
2.
In the Actions panel on the left, click TACACS+ . The TACACS+ Setup window will be
displayed:
248
Host : The address of the TACACS+ server
Port : The port number of the TACACS+ server
Secret Key : The same encryption key as used on the TACACS+ server.
Note: SecureSync supports multiple TACACS+ servers. The system per
formance, however, will be negatively affected by a large number of serv
ers or invalid servers, respectively.
DISABLED : The TACACS+ service is disabled (see below to enable it)
UNREACHABLE : This TACACS+ server cannot be reached.
REACHABLE : This TACACS+ server can be reached.
delete a TACACS+ server from the list, click the X -button in the Actions column.
CHAPTER •
4 SecureSync User Reference Guide Rev. 23