Subnet Mask Values; Accessing The Web Ui - Spectracom SecureSync 1200 User Reference Manual

2.13 Accessing the Web UI

2.12.3 Subnet Mask Values

Table 2-2:
Network Bits Equivalent Netmask Network Bits Equivalent Netmask
30
29
28
27
26
25
24
23
22
21
20
19
2.13 Accessing the Web UI
SecureSync's Web UI is the recommended tool to interact with the device, since it provides
access to nearly all configurable settings, and obtain comprehensive status information without
having to use the Command Line Interpreter (CLI).
You can access the Web UI either by using the automatically assigned DHCP IP address, or by
using a manually set static IP address (see "Assigning a Static IP Address" on page 45):
1.
On a computer connected to the SecureSync network, start a web browser, and enter the
IP address shown on the SecureSync front panel, or setup manually beforehand into the
web browser address.
2.
When first connecting to the Web UI, a warning about security certificates may be dis
played:
52
Subnet mask values
255.255.255.252 18
255.255.255.248 17
255.255.255.240 16
255.255.255.224 15
255.255.255.192 14
255.255.255.128 13
255.255.255.0 12
255.255.254.0 11
255.255.252.0 10
255.255.248.0 9
255.255.240.0 8
255.255.224.0
255.255.192.0
255.255.128.0
255.255.0.0
255.254.0.0
255.252.0.0
255.248.0.0
255.240.0.0
255.224.0.0
255.192.0.0
255.128.0.0
255.0.0.0
CHAPTER •
2 SecureSync User Reference Guide Rev. 23