1.8
Regulatory Compliance
This product has been found to be in conformance with the following regulatory publications.
FCC
This equipment has been tested and found to comply with the limits for a Class A digital
device , pursuant to Part 15 of the FCC Rules .
These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment . This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the user
documentation, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his/her own expense.
Safety
EN 60950 - 1:2006/A11:2009: Safety of Information Technology Equipment, including Elec
trical Business Equipment
This product has been tested and meets the requirements specified in:
EMC, CE:
CHAPTER
•
1
SecureSync User Reference Guide Rev. 23
Vibration :
Operating : 10-55 Hz @ 0.07 g
Storage : 10-55 Hz @ 0.15 g²/Hz; 55-500 Hz @ 2.0 g²/Hz
MIL-STD-810F : 501.4, 502.4, 507.4, 500.4, 516.5, 514.5
UL 60950-1, 1st Edition
CSA C22.2 No. 60950-1-07, 2nd Edition
UL Listing no. E311040
EN 55022:2006/A1:2007: Class A: EC Emissions Standard
EN 55024:1998/A2:2003: EC Generic Immunity Standard
EN 61000-3-2:2006: Harmonic Current Emissions
EN 61000-3-3:1995/A2:2005: Voltage Fluctuations and Flicker
The product complies with the requirements of the Low Voltage Directive 2006/95/EC
and the EMC Directive 2004/108/EC .
This is a Class A product. In a domestic environment this product
Note:
1.8 Regulatory Compliance
²
²
/Hz; 55-500 Hz @ 1.0 g
/Hz
27
Need help?
Do you have a question about the SecureSync 1200 and is the answer not in the manual?
Questions and answers
How to list all the client hosts on SecureSync 1200?