Unpacking And Inventory - Spectracom SecureSync 1200 User Reference Manual

6.
7.
8.
9.
2.2

Unpacking and Inventory

Unpack the equipment and inspect it for damage. If any equipment has been damaged in
transit, or you experience any problems during installation and configuration of your Spec
tracom product, please contact Spectracom (see "Technical Support" on page 540.)
The following items are included with your shipment:
CHAPTER •
2 SecureSync User Reference Guide Rev. 23
Connect Input References such as your GNSS antenna, and network cable(s): "Con
necting the GNSS Input" on page 40, and "Connecting Network Cables" on page 41.
Power up the unit: "Powering Up the Unit" on page 216.
Setup basic network connectivity...
i.
...via front panel keypad and information display: "Setting Up an IP Address via
the Front Panel" on page 47
ii.
...or via serial port, using a PC with a CLI: "Setting Up an IP Address via the
Serial Port" on page 50
iii.
...or via Ethernet, using a PC with a web browser, and the SecureSync Web UI:
"Accessing the Web UI" on page 52.
Register your product: "Product Registration" on page 258.
Caution: Electronic equipment is sensitive to Electrostatic Discharge (ESD).
Observe all ESD precautions and safeguards when handling the unit.
Note: Retain all original packaging for use in return shipments if necessary.
SecureSync unit
QuickStart Guide (printed version), and CD "Timing Product Manuals"
Ancillary items (except for rack mounting items, the contents of this kit may vary based
on equipment configuration and/or regional requirements)
Purchased optional equipment; note that option cards listed on the purchase order will
be pre-installed in the unit. See "Option Card Identification" on page 13 and "Option
Cards Overview" on page 10.
2.2 Unpacking and Inventory
31