General Network Settings - Spectracom SecureSync 1200 User Reference Manual

2.14.1 General Network Settings

To expedite network setup, SecureSync provides the General Settings window, allowing quick
access to the primary network settings.
To access the General Settings window:
1.
CHAPTER •
2 SecureSync User Reference Guide Rev. 23
SSH : This button takes you to the SSH Setup window. For details on setting up
SSH, see "SSH" on page 69.
HTTPS : This button takes you to the HTTPS Setup window. For details on setting
up HTTPS, see "HTTPS" on page 61.
System Time Message : Setup a once- per- second time message to be sent to
receivers via multicast. For details, see "System Time Message" on page 87.
The Network Services panel is used to enable (ON) and disable (OFF) network services,
as well as the Web UI display mode, details see: "Network Services" on page 58.
The Ports panel not only displays STATUS information, but is used also to set up and man
age SecureSync's network ports via three buttons:
INFO button: Displays the Ethernet port Status window for review purposes.
GEAR button: Displays the Ethernet port settings window for editing purposes.
TABLE button: Displays a window that allows adding, editing, and reviewing
Static Routes.
Navigate to MANAGEMENT > Network Setup . In the Actions Panel on the left, click
General Settings .
2.14 Configuring Network Settings
55