Spectracom SecureSync 1200 User Reference Manual page 175

To add a new entry to the Reference Status table:
1.
2.
3.
4.
5.
Deleting a Reference Entry
To delete an entry from the Reference Status table:
1.
2.
3.
Reordering Reference Entries
To reorder the priority of a reference entry:
1.
2.
3.
CHAPTER •
3 SecureSync User Reference Guide Rev. 23
Navigate to the Configure Reference Priorities screen via MANAGEMENT > OTHER:
Reference Priority .
Click the PLUS icon in the top right-hand corner of the Configure Reference Priorities
table.
The Add Reference window will display:
In the Add Reference window, enter:
Priority Level : Assign a priority to the new reference.
Time : Select the time reference.
PPS : Select the PPS reference.
Enabled : Check this box to enable the new reference.
Click Apply or Submit . ( Submit will close the window.)
Navigate to the Configure Reference Priorities screen via MANAGEMENT > OTHER:
Reference Priority .
In the Configure Reference Priorities table click the Delete button on the right-hand side
of the entry you wish to delete.
In the pop-up window that opens click OK to confirm.
Navigate to the Configure Reference Priorities screen via MANAGEMENT > OTHER:
Reference Priority .
Click and hold on the item whose priority you wish to reorder.
Drag the item up or down to the desired place.
3.3 Managing References
159