B Codes For Activating/Deactivating Features; Table 3-115 Table - Siemens HiPath 3000 Service Manual

B Codes for Activating/Deactivating Features
This appendix describes the options for activating and deactivating features depending on the
different workpoint clients (WpC).
Table B-1 contains all the activation/deactivation procedures for analog workpoint clients,
TDM workpoint clients without a display and CMI mobile phones. The table only
contains the access codes for TDM workpoint clients with a display, CMI feature
mobile phones and IP workpoint clients. The procedures for S
either correspond to procedures for analog workpoint clients or are handled via
the relevant ISDN protocol with the terminal-specific user interface.
The table also contains information about the effect of the telephone lock and
the status-specific locking of features.
Table B-2 contains a description of the various types of workpoint clients.
Table B-1 Codes for Activating/Deactivating Features
TDM workpoint
clients without
display,
CMI mobile
phones,
analog work-
point clients
Feature
Activate relay *90+Relay no.
Deactivate re- #90+Relay no.
lay
Accept call *55
waiting (camp-
on)
Abbreviations:
●
Call states: RH = idle, BR = ready, WA = digit input, BS = busy, RK = incoming call, RG = outgoing call, GS = call
●
Key programming: V = key can be programmed with complete feature, U = key can be programmed to start procedure, T = key with
toggle functionality
●
Menu level: H = Main menu, U1 = 1st submenu, U2 = 2nd submenu
P31003-H3550-S403-4-7620, 02/05
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
Operating procedure for
TDM workpoint clients with
S work- display,
0
point cli- CMI feature mobile phones,
ents IP workpoint clients,
optiClient 130 V5.0 phone
1
Key
7590... *90... – V, T
7690... #90... – V, T
Call wait- *55 –
ing
(local S
0
WpC
function-
ality)
Codes for Activating/Deactivating Features
optiCli-
optiCli-
ent 130
ent 130
V5.0
easy-
office
Com
Menu
– H –
– H –
V BR, U Mouse Mouse
WA, click,
RG, Drag&
GS, Drop
BS
workpoint clients
0
Sup-
ported
Locking of
work-
feature
V5.0
point
clients
(see
abbre-
via-
tions
in
Table
B-2)
– A X RK,
BS
– A X RK,
BS
A – –
click
fcodes.fm
Note
Also possible via
the DSS, GESP,
LTG or MUSAP
key
B-1