Digisol DG-GS4826S Management Manual page 574

C 21 | Unicast Routing
HAPTER
Configuring the Open Shortest Path First Protocol (Version 2)
D
ISPLAYING
I
NFORMATION ON
NSSA S
AND TUB
A
REAS
Figure 365: Configuring Protocol Settings for a Stub
Use the Routing Protocol > OSPF > Area (Show Information) page to
protocol information on NSSA and Stub areas.
CLI R
EFERENCES
"show ip ospf" on page 1218
u
P
ARAMETERS
These parameters are displayed in the web interface:
Process ID – Process ID as configured in the Network Area
u
configuration screen (see
Area ID – Identifier for a not-so-stubby area (NSSA) or stub.
u
SPF Runs – The number of times the Shortest Path First algorithm has
u
been run for this area.
ABR Count – The number of Area Border Routers attached to this
u
area.
ASBR Count – The number of Autonomous System Boundary Routers
u
attached to this area.
LSA Count – The number of new link-state advertisements that have
u
been originated.
LSA Checksum Sum – The sum of the link-state advertisements' LS
u
checksums contained in this area's link-state database.
W I
EB NTERFACE
To display information on NSSA and stub areas:
1. Click Routing Protocol, OSPF, Area.
2.
Select Show Information from the Action list.
3. Select a Process ID.
– 574 –
page 560).