Digisol DG-GS4826S Management Manual page 546

C 21 | Unicast Routing
HAPTER
Configuring the Routing Information Protocol
P
ARAMETERS
These parameters are displayed in the web interface:
By Address – Adds a network to the RIP routing process.
u
Subnet Address – IP address of a network directly connected to
n
this router. (Default: No networks are specified)
Prefix Length – A decimal value indicating how many contiguous
n
bits (from the left) of the address comprise the network portion of
the address. This mask identifies the network address bits used for
the associated routing entries.
By VLAN – Adds a Layer 3 VLAN to the RIP routing process. The VLAN
u
must be configured with an IP address. (Range: 1-4093)
W I
EB NTERFACE
To add a network interface to RIP:
1. Click Routing Protocol, RIP, Network.
2.
Select Add from the Action list.
3. Add an interface that will participate in RIP.
4. Click Apply.
Figure 337: Adding Network Interfaces to RIP
To show the network interfaces using RIP:
1. Click Routing Protocol, RIP, Network.
2. Select Show from the Action list.
3. Click IP Address or VLAN.
– 546 –