Rmon Collection Rmon1 - Digisol DG-GS4826S Management Manual

E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#rmon collection history 21 buckets 24 interval 60 owner
Console(config-if)#
rmon collection
This command enables the collection of statistics on a physical interface.
Use the no form to disable statistics collection.
rmon1
S
YNTAX
D
EFAULT
Enabled
C
OMMAND
Interface Configuration (Ethernet)
C
OMMAND
u
u
u
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#rmon collection rmon1 controlEntry 1 owner mike
Console(config-if)#
mike
rmon collection rmon1 controlEntry index [owner name]
no rmon collection rmon1 controlEntry index
index – Index to this entry. (Range: 1-65535)
name – Name of the person who created this entry.
(Range: 1-127 characters)
S
ETTING
M
ODE
U
SAGE
By default, each index number equates to a port on the switch, but can
be changed to any number not currently in use.
If statistics collection is already enabled on an interface, the entry must
be deleted before any changes can be made with this command.
The information collected for each entry includes:
input octets, packets, broadcast packets, multicast packets, undersize
packets, oversize packets, fragments, jabbers, CRC alignment errors,
collisions, drop events, and packets of specified lengths
– 717 –
C 27 | Remote Monitoring Commands
HAPTER