Igmp (Layer 3); Ip Igmp; Table 130: Show Mvr Members - Display Description; Table 131: Igmp Commands (Layer 3) - Digisol DG-GS4826S Management Manual

Layer 3 gigabit ethernet managed switch
Table of Contents

Advertisement

C
42
| Multicast Filtering Commands
HAPTER

IGMP (Layer 3)

IGMP (L
3)
AYER

ip igmp

Table 130: show mvr members - display description

Field
Description
MVR Forwarding Entry
The number of multicast services currently being forwarded from
Count
the MVR VLAN.
Group Address
Multicast groups assigned to the MVR VLAN.
Source Address
Indicates the source address of the multicast service, or displays
an asterisk if the group address has been statically assigned.
VLAN
Indicates the MVR VLAN receiving the multicast service.
Forwarding Port
Shows the interfaces with subscribers for multicast services
provided through the MVR VLAN. Also shows the VLAN through
which the service is received. Note that this may be different from
the MVR VLAN if the group address has been statically assigned.
This section describes commands used to configure Layer 3 Internet Group
Management Protocol (IGMP) on the switch.

Table 131: IGMP Commands (Layer 3)

Command
Function
ip igmp
Enables IGMP for the specified interface
ip igmp last-member-
Configures the frequency at which to send query
query-interval
messages in response to receiving a leave message
ip igmp max-resp-interval
Configures the maximum host response time
ip igmp query-interval
Configures frequency for sending host query messages IC
ip igmp robustval
Configures the expected packet loss
ip igmp static-group
Configures the router to be a static member of a
multicast group on the specified VLAN interface
ip igmp version
Configures IGMP version used on this interface
clear ip igmp group
Deletes entries from the IGMP cache
show ip igmp groups
Displays information for IGMP groups
show ip igmp interface
Displays multicast information for the specified
interface
This command enables IGMP on a VLAN interface. Use the no form of this
command to disable IGMP on the specified interface.
S
YNTAX
[no] ip igmp
D
S
EFAULT
ETTING
Disabled
– 1036 –
Mode
IC
IC
IC
IC
IC
IC
PE
PE
PE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dg-gs4850s

Table of Contents