Digisol DG-GS4826S Management Manual page 591

Configuring the Open Shortest Path First Protocol (Version 2)
CLI R
EFERENCES
"show ip ospf database" on page 1221
u
P
ARAMETERS
These parameters are displayed in the web interface:
Process ID – Process ID as configured in the Network Area
u
configuration screen (see
Query by – The LSA database can be searched using the following
u
criteria:
Self-Originate – LSAs generated by this router.
n
Link ID – LSAs advertising a specific link.
n
Adv Router – LSAs advertised by a specific router.
n
Link State Type – The information returned by a query can be
u
displayed for all LSA types or for a specific type. (Default: All)
Information displayed for each LSA entry includes:
Area ID – Area defined for which LSA information is to be displayed.
u
Link ID – Network portion described by an LSA. The Link ID is either:
u
An IP network number for Type 3 Summary and Type 5 AS External
n
LSAs. (When an Type 5 AS External LSA is describing a default
route, its Link ID is set to the default destination 0.0.0.0.)
A Router ID for Router, Network, and Type 4 AS Summary LSAs.
n
Adv Router – IP address of the advertising router.
u
Age – Age of LSA (in seconds).
u
Sequence – Sequence number of LSA (used to detect older duplicate
u
LSAs).
Checksum – Checksum of the complete contents of the LSA.
u
W I
EB NTERFACE
To display information in the link state database:
1. Click Routing Protocol, OSPF, Information.
2. Click LSDB.
3. Select the process identifier.
4. Specify required search criteria, such as self-originated LSAs, LSAs with
a specific link ID, or LSAs advertised by a specific router.
5. Then select the database entries to display based on LSA type.
– 591 –
C
HAPTER
page 560).
21 | Unicast Routing