Digisol DG-GS4826S Management Manual page 637

Table 37: Command Group Index (Continued)
Command Group Description
Class of Service Sets port priority for untagged frames, selects strict
priority or weighted round robin, relative weight for each
priority queue, also sets priority for TCP/UDP traffic
types, IP precedence, and DSCP
Quality of Service Configures Differentiated Services
Multicast Filtering Configures IGMP multicast filtering, query, profile, and
proxy parameters; specifies ports attached to a multicast
router; also configures multicast VLAN registration
Link Layer Discovery Configures LLDP settings to enable information discovery
about neighbor devices
Protocol
Domain Name Service Configures DNS services.
Dynamic Host Configures DHCP client, relay and server functions
Configuration Protocol
Router Redundancy Configures router redundancy to create primary and
backup routers
IP Interface Configures IP address for the switch interfaces; also
configures ARP parameters and static entries
IP Routing Configures static and dynamic unicast routing
Multicast Routing Configures multicast routing protocols PIM-DM and PIM-
SM
The access mode shown in the following tables is indicated by these
abbreviations:
ACL (Access Control List Configuration)
CM (Class Map Configuration)
DC (DHCP Server Configuration)
GC (Global Configuration)
IC (Interface Configuration)
IPC (IGMP Profile Configuration)
LC (Line Configuration)
MST (Multiple Spanning Tree)
NE (Normal Exec)
PE (Privileged Exec)
PM (Policy Map Configuration)
RC (Router Configuration)
VC (VLAN Database Configuration)
– 637 –
C 23 | Using the Command Line Interface
HAPTER
CLI Command Groups
Page
967
981
999
1061
1079
1089
1107
1117
1165
1261