Digisol DG-GS4826S Management Manual page 456

C 16 | Multicast Filtering
HAPTER
Layer 3 IGMP (Query used with Multicast Routing)
Show Detail
The following additional information is displayed on this page:
VLAN – VLAN identifier. The selected entry must be a configured IP
u
interface. (Range: 1-4093)
Group Address – IP multicast group address with subscribers directly
u
attached or downstream from the switch, or a static multicast group
assigned to this interface.
Interface – The interface on the switch that has received traffic
u
directed to the multicast group address.
Up Time – The time elapsed since this entry was created. (Depending
u
on the elapsed time, information may displayed for w:weeks, d:days,
h:hours, m:minutes, or s:seconds.)
Group Mode – In INCLUDE mode, reception of packets sent to the
u
specified multicast address is requested only from those IP source
addresses listed in the source-list parameter. In EXCLUDE mode,
reception of packets sent to the given multicast address is requested
from all IP source addresses, except for those listed in the source-list
parameter and for any other sources where the source timer status has
expired.
Group Source List – A list of zero or more IP unicast addresses from
u
which multicast reception is desired or not desired, depending on the
filter mode.
Source Address – The address of one of the multicast servers
n
transmitting traffic to the specified group.
Up Time – The time elapsed since this entry was created.
n
(Depending on the elapsed time, information may displayed for
w:weeks, d:days, h:hours, m:minutes, or s:seconds.)
V3 Expire – The time remaining before this entry will be aged out.
n
The V3 label indicates that the expire time is only provided for
sources learned through IGMP Version 3. (The default is 260
seconds.)
Forward – Indicates whether or not traffic will be forwarded from
n
the multicast source.
W I
EB NTERFACE
To display the current multicast groups learned through IGMP:
1. Click Multicast, IGMP, Group Information.
2. Select Show Information from the Action list.
3.
Select a VLAN. The selected entry must be a configured IP interface.
– 456 –