Digisol DG-GS4826S Management Manual page 430

C 16 | Multicast Filtering
HAPTER
Layer 2 IGMP (Snooping and Query)
This attribute configures the IGMP report/query version used by IGMP
snooping. Versions 1 - 3 are all supported, and versions 2 and 3 are
backward compatible, so the switch can operate with other devices,
regardless of the snooping version employed.
Querier Status – When enabled, the switch can serve as the Querier,
u
which is responsible for asking hosts if they want to receive multicast
traffic. This feature is not supported for IGMPv3 snooping.
(Default: Disabled)
W I
EB NTERFACE
To configure general settings for IGMP Snooping and Query:
1.
Click Multicast, IGMP Snooping, General.
2. Adjust the IGMP settings as required.
3. Click Apply.
Figure 242: Configuring General Settings for IGMP Snooping
– 430 –