Digisol DG-GS4826S Management Manual page 110

C 3 | Using the Web Interface
HAPTER
Navigating the Web Browser Interface
Table 4: Switch Main Menu (Continued)
Menu
Network
Add
Show
Passive Interface
Add
Show
Neighbor Address
Add
Show
Redistribute
Add
Show
Distance
Add
Show
Interface
Add
Show
Modify
Statistics
Show Interface Information
Show Peer Information
Reset Statistics
OSPF
Network Area
Add
Show
Show Process
System
Configure
Show
Description
Sets the network interfaces that will use RIP
Shows the network interfaces that will use RIP
Stops RIP broadcast and multicast messages from being sent on
specified network interfaces
Shows the configured passive interfaces
Configures the router to directly exchange routing
information with a static neighbor
Shows adjacent hosts or interfaces configured as a neighboring
router
Imports external routing information from other routing domains
(that is, protocols) into the autonomous system
Shows the external routing information to be imported from other
routing domains
Defines an administrative distance for external routes learned from
other routing protocols
Shows the administrative distances assigned to external routes
learned from other routing protocols
Configures RIP parameters for each interface, including send and
receive versions, authentication, and method of loopback
prevention
Shows the RIP parameters set for each interface
Modifies RIP parameters for an interface
Shows RIP settings, and statistics on RIP protocol messages
Displays information on neighboring RIP routers
Clears statistics for RIP protocol messages
Open Shortest Path First (Version 2)
Defines OSPF area address, area ID, and process ID
Shows configured areas
Show configured processes
Configures the Router ID, global settings, and default information
Shows LSA statistics, administrative status, ABR/ASBR, area
count, and version number
– 110 –
Page
545
545
545
547
547
547
548
548
548
549
549
549
551
551
551
552
552
552
552
556
557
558
558
560
560
560
560
563
563
566