Digisol DG-GS4826S Management Manual page 519

When an incomplete host name is received by the DNS service on this
u
switch and a domain name list has been specified, the switch will work
through the domain list, appending each domain name in the list to the
host name, and checking with the specified name servers for a match
(see "Configuring a List of Name Servers" on page
P
ARAMETERS
These parameters are displayed in the web interface:
Domain Name – Name of the host. Do not include the initial dot that
separates the host name from the domain name.
(Range: 1-68 characters)
W I
EB NTERFACE
To create a list domain names:
1. Click IP Service, DNS.
2.
Select Add Domain Name from the Action list.
3.
Enter one domain name at a time.
4. Click Apply.
Figure 311: Configuring a List of Domain Names for DNS
To show the list domain names:
1. Click IP Service, DNS.
2.
Select Show Domain Names from the Action list.
Figure 312: Showing the List of Domain Names for DNS
– 519 –
C 20 | IP Services
HAPTER
Domain Name Service
520).