Digisol DG-GS4826S Management Manual page 255

Description – A brief description of a class map. (Range: 1-64
u
characters)
Add Rule
Class Name – Name of the class map.
u
Type – Only one match command is permitted per class map, so the
u
match-any field refers to the criteria specified by the lone match
command.
ACL – Name of an access control list. Any type of ACL can be specified,
u
including standard or extended IP ACLs and MAC ACLs.
IP DSCP – A DSCP value. (Range: 0-63)
u
IP Precedence – An IP Precedence value. (Range: 0-7)
u
IPv6 DSCP – A DSCP value contained in an IPv6 packet. (Range: 0-63)
u
VLAN ID – A VLAN. (Range:1-4093)
u
W I
EB NTERFACE
To configure a class map:
1. Click Traffic, DiffServ.
2. Select Configure Class from the Step list.
3. Select Add from the Action list.
4.
Enter a class name.
5. Enter a description.
6. Click Add.
Figure 117: Configuring a Class Map
– 255 –
C 12 | Quality of Service
HAPTER
Configuring a Class Map