Digisol DG-GS4826S Management Manual page 405

AuthPriv – SNMP communications use both authentication and
n
encryption.
Authentication Protocol – The method used for user authentication.
u
(Options: MD5, SHA; Default: MD5)
Authentication Password – A minimum of eight plain text characters
u
is required.
Privacy Protocol – The encryption algorithm use for data privacy;
u
only 56-bit DES is currently available.
Privacy Password – A minimum of eight plain text characters is
u
required.
W I
EB NTERFACE
To configure a remote SNMPv3 user:
1.
Click Administration, SNMP.
2.
Select Configure User from the Step list.
3. Select Add SNMPv3 Remote User from the Action list.
4. Enter a name and assign it to a group. Enter the IP address to identify
the source of SNMPv3 inform messages sent from the local switch. If
the security model is set to SNMPv3 and the security level is authNoPriv
or authPriv, then an authentication protocol and password must be
specified. If the security level is authPriv, a privacy password must also
be specified.
5. Click Apply.
– 405 –
C 15 | Basic Administration Protocols
HAPTER
Simple Network Management Protocol