Digisol DG-GS4826S Management Manual page 98

C 3 | Using the Web Interface
HAPTER
Navigating the Web Browser Interface
Table 4: Switch Main Menu (Continued)
Menu
VLAN Trunking
VLAN
Static
Add
Show
Modify
Edit Member by VLAN
Edit Member by Interface
Edit Member by Interface Range
Dynamic
Configure General
Configure Interface
Show Dynamic VLAN
Show VLAN
Show VLAN Member
Private
Configure VLAN
Add
Show
Add Community VLAN
Show Community VLAN
Configure Interface
Tunnel
Configure Global
Configure Interface
Protocol
Configure Protocol
Add
Show
Configure Interface
Add
Show
IP Subnet
Add
Show
Description
Allows unknown VLAN groups to pass through the specified
interface
Virtual LAN
Creates VLAN groups
Displays configured VLAN groups
Configures group name and administrative status
Specifies VLAN attributes per VLAN
Specifies VLAN attributes per interface
Specifies VLAN attributes per interface range
Enables GVRP VLAN registration protocol globally
Configures GVRP status and timers per interface
Shows the VLANs this switch has joined through GVRP
Shows the interfaces assigned to a VLAN through GVRP
Creates primary or community VLANs
Display configured primary and community VLANs
Associates a community VLAN with a primary VLAN
Shows the community VLANs associated with a primary VLAN
Sets the private VLAN interface type, and associates the
interfaces with a private VLAN
IEEE 802.1Q (QinQ) Tunneling
Sets tunnel mode for the switch
Sets the tunnel mode for any participating interface
Creates a protocol group, specifying supported protocols
Shows configured protocol groups
Maps a protocol group to a VLAN
Shows the protocol groups mapped to each VLAN
Maps IP subnet traffic to a VLAN
Shows IP subnet to VLAN mapping
– 98 –
Page
169
174
174
174
176
176
176
181
181
181
181
184
184
186
186
187
189
193
194
196
196
198
198
200
200