Digisol DG-GS4826S Management Manual page 401

P
ARAMETERS
These parameters are displayed in the web interface:
Community String – A community string that acts like a password
u
and permits access to the SNMP protocol.
Range: 1-32 characters, case sensitive
Default strings: "public" (Read-Only), "private" (Read/Write)
Access Mode – Specifies the access rights for the community string:
u
Read-Only – Authorized management stations are only able to
n
retrieve MIB objects.
Read/Write – Authorized management stations are able to both
n
retrieve and modify MIB objects.
W I
EB NTERFACE
To set a community access string:
1.
Click Administration, SNMP.
2. Select Configure User from the Step list.
3. Select Add Community from the Action list.
4. Add new community strings as required, and select the corresponding
access rights from the Access Mode list.
5. Click Apply
Figure 220: Setting Community Access Strings
To show the community access strings:
1. Click Administration, SNMP.
2. Select Configure User from the Step list.
3. Select Show Community from the Action list.
– 401 –
C 15 | Basic Administration Protocols
HAPTER
Simple Network Management Protocol