C
20
| IP Services
HAPTER
Dynamic Host Configuration Protocol
W
I
EB
NTERFACE
To configure IP addresses excluded for DHCP clients:
1.
Click IP Service, DHCP, Server.
2.
Select Configure Excluded Addresses from the Step list.
3.
Select Add from the Action list.
4.
Enter a single address or an address range.
5.
Click Apply.
Figure 323: Configuring Excluded Addresses on the DHCP Server
To show the IP addresses excluded for DHCP clients:
1.
Click IP Service, DHCP, Server.
2.
Select Configure Excluded Addresses from the Step list.
3.
Select Show from the Action list.
Figure 324: Showing Excluded Addresses on the DHCP Server
C
A
ONFIGURING
DDRESS
Use the IP Service > DHCP > Server (Configure Pool – Add) page configure
IP address pools for each IP interface that will provide addresses to
attached clients via the DHCP server.
CLI R
EFERENCES
"DHCP Server" on page 1094
u
– 528 –
P
OOLS