Digisol DG-GS4826S Management Manual page 188

C 6 | VLAN Configuration
HAPTER
Private VLANs
W I
EB NTERFACE
To configure a private VLAN port or trunk:
1.
Click VLAN, Private.
2.
Select Configure Interface from the Step list.
3. Set the Interface type to display as Port or Trunk.
4. Set the Port Mode to Promiscuous.
5. For an interface set the Promiscuous mode, select an entry from the
Primary VLAN list.
6. For an interface set the Host mode, select an entry from the
Community VLAN list.
7. Click Apply.
Figure 69: Configuring Interfaces for Private VLANs
– 188 –