Digisol DG-GS4826S Management Manual page 532

C 20 | IP Services
HAPTER
Dynamic Host Configuration Protocol
3. Select Show from the Action list.
Figure 327: Showing Configured DHCP Server Address Pools
D A B
ISPLAYING DDRESS
Use the IP Service > DHCP > Server (Show IP Binding) page display the
host devices which have acquired an IP address from this switch's DHCP
server.
CLI R
EFERENCES
"show ip dhcp binding" on page 1105
u
P
ARAMETERS
These parameters are displayed in the web interface:
IP Address – IP address assigned to host.
u
MAC Address – MAC address of host.
u
Lease Time – Duration that this IP address can be used by the host.
u
Start Time – Time this address was assigned by the switch.
u
W I
EB NTERFACE
To show the addresses assigned to DHCP clients:
1. Click IP Service, DHCP, Server.
2.
Select Show IP Binding from the Step list.
Figure 328: Shows Addresses Assigned by the DHCP Server
– 532 –
INDINGS