C
19
| Configuring Router Redundancy
HAPTER
Configuring VRRP Groups
Figure 303: Configuring the VRRP Group ID
To show the configured VRRP groups:
1.
Click IP, VRRP.
2.
Select Configure Group ID from the Step List.
3.
Select Show from the Action List.
Figure 304: Showing Configured VRRP Groups
To configure the virtual router address for a VRRP group:
1.
Click IP, VRRP.
2.
Select Configure Group ID from the Step List.
3.
Select Add IP Address from the Action List.
4.
Select a VLAN, a VRRP group identifier, and enter the IP address for the
virtual router.
5.
Click Apply.
– 512 –