Digisol DG-GS4826S Management Manual page 1076

Layer 3 gigabit ethernet managed switch
Table of Contents

Advertisement

C
43
| LLDP Commands
HAPTER
show lldp info
statistics
PortID Type
: MAC Address
PortID
: 00-01-02-03-04-06
SysName
:
System Description : DG-GS4850S/DG-GS4826S
Port Description
: Ethernet Port on unit 1, port 1
SystemCapSupported : Bridge, Router
SystemCapEnabled
: Bridge, Router
Remote Management Address :
192.168.0.2 (IPv4)
Remote Port VID : 1
Remote VLAN Name :
VLAN-1 : DefaultVlan
Remote Protocol Identity (Hex) :
88-CC
Remote MAC/PHY configuration status :
Remote port auto-neg supported : Yes
Remote port auto-neg enabled : Yes
Remote port auto-neg advertised cap (Hex) : 6C01
Remote port MAU type : 30
Remote Link Aggregation :
Remote link aggregation capable : Yes
Remote link aggregation enable : No
Remote link aggregation port id : 0
Remote Max Frame Size : 1518
Console#
This command shows statistics based on traffic received through all
attached LLDP-enabled interfaces.
S
YNTAX
show lldp info statistics [detail interface]
detail - Shows configuration summary.
interface
ethernet unit/port
unit - Stack unit. (Range: 1-8)
port - Port number. (Range: 1-26/50)
port-channel channel-id (Range: 1-32)
C
M
OMMAND
ODE
Privileged Exec
E
XAMPLE
Console#show lldp info statistics
LLDP Device Statistics
Neighbor Entries List Last Updated : 2450279 seconds
New Neighbor Entries Count
Neighbor Entries Deleted Count
Neighbor Entries Dropped Count
Neighbor Entries Ageout Count
– 1076 –
: 1
: 0
: 0
: 0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dg-gs4850s

Table of Contents