Digisol DG-GS4826S Management Manual page 949

3. Use the
promiscuous (i.e., having access to all ports in the primary VLAN) or
host (i.e., community port).
4. Use the
port to a community VLAN.
5.
Use the
primary VLAN.
6. Use the
settings.
private-vlan
Use this command to create a primary or community private VLAN. Use the
no form to remove the specified private VLAN.
S
YNTAX
private-vlan vlan-id {community | primary}
no private-vlan vlan-id
vlan-id - ID of private VLAN. (Range: 1-4093, no leading zeroes).
community - A VLAN in which traffic is restricted to host
members in the same VLAN and to promiscuous ports in the
associate primary VLAN.
primary - A VLAN which can contain one or more community
VLANs, and serves to channel traffic between community VLANs
and other locations.
D
EFAULT
None
C
OMMAND
VLAN Configuration
C
OMMAND
Private VLANs are used to restrict traffic to ports within the same
u
community, and channel traffic passing outside the community through
promiscuous ports. When using community VLANs, they must be
mapped to an associated "primary" VLAN that contains promiscuous
ports.
Port membership for private VLANs is static. Once a port has been
u
assigned to a private VLAN, it cannot be dynamically moved to another
VLAN via GVRP.
Private VLAN ports cannot be set to trunked mode. (See
u
mode" on page
switchport mode private-vlan
switchport private-vlan host-association
switchport private-vlan mapping
show vlan private-vlan
S
ETTING
M
ODE
U
SAGE
936.)
– 949 –
C 39 | VLAN Commands
HAPTER
Configuring Private VLANs
command to configure ports as
command to assign a
command to assign a port to a
command to verify your configuration
"switchport