Digisol DG-GS4826S Management Manual page 585

Configuring the Open Shortest Path First Protocol (Version 2)
Figure 375: Configuring Settings for All Interfaces Assigned to a VLAN
To configure interface settings for a specific area assigned to a VLAN:
1. Click Routing Protocol, OSPF, Interface.
2. Select Configure by Address from the Action list.
3.
Specify the VLAN ID, enter the address assigned to an area, and
configure the required interface settings.
4. Click Apply.
– 585 –
C 21 | Unicast Routing
HAPTER