Digisol DG-GS4826S Management Manual page 145

P
ARAMETERS
These parameters are displayed in the web interface:
Source Port – The port whose traffic will be monitored.
u
(Range: 1-26/50)
Target Port – The port that will mirror the traffic on the source port.
u
(Range: 1-26/50)
Type – Allows you to select which traffic to mirror to the target port, Rx
u
(receive), Tx (transmit), or Both. (Default: Rx)
W I
EB NTERFACE
To configure a local mirror session:
1.
Click Interface, Port, Mirror.
2. Select Add from the Action List.
3. Specify the source port.
4. Specify the monitor port.
5. Specify the traffic type to be mirrored.
6.
Click Apply.
Figure 28: Configuring Local Port Mirroring
To display the configured mirror sessions:
1. Click Interface, Port, Mirror.
2. Select Show from the Action List.
– 145 –
C 5 | Interface Configuration
HAPTER
Port Configuration