Digisol DG-GS4826S Management Manual page 206

C 7 | Address Table Settings
HAPTER
Configuring MAC Address Learning
Also note that MAC address learning cannot be disabled if any of the
u
following conditions exist:
802.1X Port Authentication has been globally enabled on the switch
n
(see "Configuring 802.1X Global Settings" on page
Security Status (see
n
enabled on the same interface.
P
ARAMETERS
These parameters are displayed in the web interface:
Interface – Displays a list of ports or trunks.
u
Port – Port Identifier. (Range: 1-26/50)
u
Trunk – Trunk Identifier. (Range: 1-32)
u
Status – The status of MAC address learning. (Default: Enabled)
u
W I
EB NTERFACE
To enable or disable MAC address learning:
1. Click MAC Address, Learning Status.
2. Set the learning status for any interface.
3. Click Apply.
Figure 81: Configuring MAC Address Learning
– 206 –
"Configuring Port Security" on page
347).
344) is