Digisol DG-GS4826S Management Manual page 393

P
ARAMETERS
These parameters are displayed in the web interface:
Remote Engine ID – The engine ID can be specified by entering 9 to
u
64 hexadecimal characters (5 to 32 octets in hexadecimal format). If
an odd number of characters are specified, a trailing zero is added to
the value to fill in the last octet. For example, the value "123456789" is
equivalent to "1234567890".
Remote IP Host – The IP address of a remote management station
u
which is using the specified engine ID.
W I
EB NTERFACE
To configure a remote SNMP engine ID:
1.
Click Administration, SNMP.
2. Select Configure Engine from the Step list.
3. Select Add Remote Engine from the Action list.
4. Enter an ID of a least 9 hexadecimal characters, and the IP address of
the remote host.
5.
Click Apply
Figure 212: Configuring a Remote Engine ID for SNMP
To show the remote SNMP engine IDs:
1. Click Administration, SNMP.
2. Select Configure Engine from the Step list.
3. Select Show Remote Engine from the Action list.
– 393 –
C 15 | Basic Administration Protocols
HAPTER
Simple Network Management Protocol