Digisol DG-GS4826S Management Manual page 772

C 29 | Authentication Commands
HAPTER
802.1X Port Authentication
Operation Mode– Shows if single or multiple hosts (clients) can
n
connect to an 802.1X-authorized port.
Port Control–Shows the dot1x mode on a port as auto, force-
n
authorized, or force-unauthorized
Intrusion Action– Sets the port response to intrusion when
n
authentication fails
Supplicant– MAC address of authorized client.
n
Authenticator PAE State Machine
u
State – Current state (including initialize, disconnected, connecting,
n
authenticating, authenticated, aborting, held, force_authorized,
force_unauthorized).
Reauth Count– Number of times connecting state is re-entered.
n
Current Identifier– The integer (0-255) used by the Authenticator to
n
identify the current authentication session.
Backend State Machine
u
State – Current state (including request, response, success, fail,
n
timeout, idle, initialize).
Request Count– Number of EAP Request packets sent to the
n
Supplicant without receiving a response.
Identifier (Server)– Identifier carried in the most recent EAP
n
Success, Failure or Request packet received from the Authentication
Server.
Reauthentication State Machine
u
State – Current state (including initialize, reauthenticate).
E
XAMPLE
Console#show dot1x
Global 802.1X Parameters
System Auth Control
Authenticator Parameters:
EAPOL Pass Through
802.1X Port Summary
Port Type
-------- ------------- -------------- ------------------ ----------
1/1 Disabled
1/2 Disabled
.
.
.
1/25 Disabled
1/26 Enabled
802.1X Port Details
802.1X Authenticator is enabled on port 1/1
.
.
.
802.1X Authenticator is enabled on port 26
Reauthentication : Enabled
Reauth Period : 3600
– 772 –
(page
(page 765).
: Enabled
: Disabled
Operation Mode Control Mode
Single-Host ForceAuthorized
Single-Host ForceAuthorized
Single-Host ForceAuthorized
Single-Host Auto
767).
Authorized
N/A
N/A
Yes
Yes