Ip Http Secure-Server; Table 69: Https System Support - Digisol DG-GS4826S Management Manual

ip http secure-
This command enables the secure hypertext transfer protocol (HTTPS) over
the Secure Socket Layer (SSL), providing secure access (i.e., an encrypted
server
connection) to the switch's web interface. Use the no form to disable this
function.
S
YNTAX
[no] ip http secure-server
D
EFAULT
Enabled
C
OMMAND
Global Configuration
C
OMMAND
Both HTTP and HTTPS service can be enabled independently on the
u
switch. However, you cannot configure the HTTP and HTTPS servers to
use the same UDP port.
If you enable HTTPS, you must indicate this in the URL that you specify
u
in your browser: https://device[:port_number]
When you start HTTPS, the connection is established in this way:
u
n
n
n
The client and server establish a secure encrypted connection.
u
A padlock icon should appear in the status bar for Internet Explorer 5.x
or above, Netscape Navigator 6.2 or above, and Mozilla Firefox 2.0.0.0
or above.
The following web browsers and operating systems currently support
HTTPS:

Table 69: HTTPS System Support

Web Browser
Internet Explorer 5.0 or later
Netscape Navigator 6.2 or
later
Mozilla Firefox 2.0.0.0 or later Windows 2000, Windows XP, Linux
S
ETTING
M
ODE
U
SAGE
The client authenticates the server using the server's digital
certificate.
The client and server negotiate a set of security protocols to use for
the connection.
The client and server generate session keys for encrypting and
decrypting data.
Operating System
Windows 98,Windows NT (with service pack 6a),
Windows 2000, Windows XP, Windows 7
Windows 98,Windows NT (with service pack 6a),
Windows 2000, Windows XP, Solaris 2.6
– 749 –
C 29 | Authentication Commands
HAPTER
Web Server