The recommended range is listed in
The default path costs are listed in
W
I
EB
NTERFACE
To configure MSTP parameters for a port or trunk:
1.
Click Spanning Tree, MSTP.
2.
Select Configure Interface from the Step list.
3.
Select Configure from the Action list.
4.
Enter the priority and path cost for an interface
5.
Click Apply.
Figure 104: Configuring MSTP Interface Settings
To display MSTP parameters for a port or trunk:
1.
Click Spanning Tree, MSTP.
2.
Select Configure Interface from the Step list.
3.
Select Show Information from the Action list.
– 235 –
C
8
| Spanning Tree Algorithm
HAPTER
Configuring Interface Settings for MSTP
Table 9 on page
224.
Table 10 on page
225.