Digisol DG-GS4826S Management Manual page 593

Configuring the Open Shortest Path First Protocol (Version 2)
Attempt – Connection down, but attempting contact (non-broadcast
n
networks)
Init – Have received Hello packet, but communications not yet
n
established
Two-way – Bidirectional communications established
n
ExStart – Initializing adjacency between neighbors
n
Exchange – Database descriptions being exchanged
n
Loading – LSA databases being exchanged
n
Full – Neighboring routers now fully adjacent
n
Identification flags include:
D – Dynamic neighbor
n
S – Static neighbor
n
DR – Designated router
n
BDR – Backup designated router
n
Address – IP address of this interface.
u
Interface – A Layer 3 interface on which OSPF has been enabled.
u
W I
EB NTERFACE
To display information about neighboring routers stored in the link state
database:
1.
Click Routing Protocol, OSPF, Information.
2. Click Neighbor.
3. Select the process identifier.
Figure 385: Displaying Neighbor Routers Stored in the Link State Database
– 593 –
C 21 | Unicast Routing
HAPTER