Digisol DG-GS4826S Management Manual page 892

C 36 | Automatic Traffic Control Commands
HAPTER
show auto-traffic-
control
show auto-traffic-
control interface
This command shows global configuration settings for automatic storm
control.
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
Console#show auto-traffic-control
Storm-control: Broadcast
Apply-timer (sec) : 300
release-timer (sec) : 900
Storm-control: Multicast
Apply-timer(sec) : 300
release-timer(sec) : 900
Console#
This command shows interface configuration settings and storm control
status for the specified port.
S
YNTAX
show auto-traffic-control interface [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1-8)
port - Port number. (Range: 1-28)
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
Console#show auto-traffic-control interface ethernet 1/1
Eth 1/1 Information
------------------------------------------------------------------------
Storm Control:
State:
Action:
Auto Release Control:
Alarm Fire Threshold(Kpps): 128
Alarm Clear Threshold(Kpps):128
Trap Storm Fire:
Trap Storm Clear:
Trap Traffic Apply:
Trap Traffic Release:
------------------------------------------------------------------------
Console#
– 892 –
Broadcast
Disabled
rate-control
Disabled
Disabled
Disabled
Disabled
Disabled
Multicast
Disabled
rate-control
Disabled
128
128
Disabled
Disabled
Disabled
Disabled