Digisol DG-GS4826S Management Manual page 197

W I
EB NTERFACE
To configure a protocol group:
1.
Click VLAN, Protocol.
2.
Select Configure Protocol from the Step list.
3. Select Add from the Action list.
4. Select an entry from the Frame Type list.
5. Select an entry from the Protocol Type list.
6. Enter an identifier for the protocol group.
7.
Click Apply.
Figure 73: Configuring Protocol VLANs
To configure a protocol group:
1. Click VLAN, Protocol.
2.
Select Configure Protocol from the Step list.
3. Select Show from the Action list.
Figure 74: Displaying Protocol VLANs
– 197 –
C 6 | VLAN Configuration
HAPTER
Protocol VLANs