Digisol DG-GS4826S Management Manual page 317

Periodic – Specifies a periodic interval.
n
Start/To – Specifies the days of the week, hours, and minutes
n
at which to start or end.
W I
EB NTERFACE
To configure a time range:
1. Click Security, ACL.
2. Select Configure Time Range from the Step list.
3. Select Add from the Action list.
4. Enter the name of a time range.
5.
Click Apply.
Figure 164: Setting the Name of a Time Range
To show a list of time ranges:
1. Click Security, ACL.
2. Select Configure Time Range from the Step list.
3.
Select Show from the Action list.
Figure 165: Showing a List of Time Ranges
To configure a rule for a time range:
1. Click Security, ACL.
2. Select Configure Time Range from the Step list.
– 317 –
C 14 | Security Measures
HAPTER
Access Control Lists