Digisol DG-GS4826S Management Manual page 279

CLI R
EFERENCES
"RADIUS Client" on page 732
u
"TACACS+ Client" on page 736
u
"AAA" on page 739
u
C U
OMMAND SAGE
If a remote authentication server is used, you must specify the
u
message exchange parameters for the remote authentication protocol.
Both local and remote logon authentication control management access
via the console port, web browser, or Telnet.
RADIUS and TACACS+ logon authentication assign a specific privilege
u
level for each user name/password pair. The user name, password, and
privilege level must be configured on the authentication server. The
encryption methods used for the authentication process must also be
configured or negotiated between the authentication server and logon
client. This switch can pass authentication messages between the
server and client that have been encrypted using MD5 (Message-Digest
5), TLS (Transport Layer Security), or TTLS (Tunneled Transport Layer
Security).
P
ARAMETERS
These parameters are displayed in the web interface:
Configure Server
RADIUS
u
Global – Provides globally applicable RADIUS settings.
n
Server Index – Specifies one of five RADIUS servers that may be
n
configured. The switch attempts authentication using the listed
sequence of servers. The process ends when a server either
approves or denies access to a user.
Server IP Address – Address of authentication server.
n
(A Server Index entry must be selected to display this item.)
Accounting Server UDP Port – Network (UDP) port on
n
authentication server used for accounting messages.
(Range: 1-65535; Default: 1813)
Authentication Server UDP Port – Network (UDP) port on
n
authentication server used for authentication messages.
(Range: 1-65535; Default: 1812)
Authentication Timeout – The number of seconds the switch
n
waits for a reply from the RADIUS server before it resends the
request. (Range: 1-65535; Default: 5)
Authentication Retries – Number of times the switch tries to
n
authenticate logon access via the authentication server.
(Range: 1-30; Default: 2)
– 279 –
C 14 | Security Measures
HAPTER
AAA Authorization and Accounting