C
14
| Security Measures
HAPTER
Access Control Lists
3.
Select Add Rule from the Action list.
4.
Select the name of time range from the drop-down list.
5.
Select a mode option of Absolute or Periodic.
6.
Fill in the required parameters for the selected mode.
7.
Click Apply.
Figure 166: Add a Rule to a Time Range
To show the rules configured for a time range:
1.
Click Security, ACL.
2.
Select Configure Time Range from the Step list.
3.
Select Show Rule from the Action list.
Figure 167: Showing the Rules Configured for a Time Range
– 318 –