Digisol DG-GS4826S Management Manual page 403

Privacy Protocol – The encryption algorithm use for data privacy;
u
only 56-bit DES is currently available.
Privacy Password – A minimum of eight plain text characters is
u
required.
W I
EB NTERFACE
To configure a local SNMPv3 user:
1. Click Administration, SNMP.
2. Select Configure User from the Step list.
3. Select Add SNMPv3 Local User from the Action list.
4.
Enter a name and assign it to a group. If the security model is set to
SNMPv3 and the security level is authNoPriv or authPriv, then an
authentication protocol and password must be specified. If the security
level is authPriv, a privacy password must also be specified.
5. Click Apply
Figure 222: Configuring Local SNMPv3 Users
To show local SNMPv3 users:
1. Click Administration, SNMP.
2. Select Configure User from the Step list.
3.
Select Show SNMPv3 Local User from the Action list.
– 403 –
C 15 | Basic Administration Protocols
HAPTER
Simple Network Management Protocol