Digisol DG-GS4826S Management Manual page 302

C 14 | Security Measures
HAPTER
Network Access (MAC Address Authentication)
C U
OMMAND SAGE
Specified MAC addresses are exempt from authentication.
u
Up to 65 filter tables can be defined.
u
There is no limitation on the number of entries used in a filter table.
u
P
ARAMETERS
These parameters are displayed in the web interface:
Filter ID – Adds a filter rule for the specified filter.
u
MAC Address – The filter rule will check ingress packets against the
u
entered MAC address or range of MAC addresses (as defined by the
MAC Address Mask).
MAC Address Mask – The filter rule will check for the range of MAC
u
addresses defined by the MAC bit mask. If you omit the mask, the
system will assign the default mask of an exact match.
(Range: 000000000000 - FFFFFFFFFFFF; Default: FFFFFFFFFFFF)
W I
EB NTERFACE
To add a MAC address filter for MAC authentication:
1.
Click Security, Network Access.
2.
Select Configure MAC Filter from the Step list.
3. Select Add from the Action list.
4. Enter a filter ID, MAC address, and optional mask.
5. Click Apply.
Figure 154: Configuring a MAC Address Filter for Network Access
To show the MAC address filter table for MAC authentication:
1. Click Security, Network Access.
2. Select Configure MAC Filter from the Step list.
3. Select Show from the Action list.
– 302 –