If you select the "auto" option, the switch will automatically detect the
baud rate configured on the attached terminal, and adjust the speed
accordingly.
: If you want to view all the system initialization messages, set the
N
OTE
baud rate to 115200 bps.
The password for the console connection can only be configured
N
:
OTE
through the CLI (see
"password" on page
Password checking can be enabled or disabled for logging in to the
N
:
OTE
console connection (see
authentication by a single global password as configured for the password
command, or by passwords set up for specific user-name accounts. The
default is for local passwords configured on the switch.
W
I
EB
NTERFACE
To configure parameters for the console port:
1.
Click System, then Console.
2.
Specify the connection parameters as required.
3.
Click Apply
Figure 15: Console Port Settings
– 129 –
C
HAPTER
669).
"login" on page
667). You can select
4
| Basic Management Tasks
Console Port Settings